Transforming Ordinary Fibers into Extraordinary Textiles with Advanced Optical Brightening Technology.
Product Detail
Whitex Glow CE-BY 300%
By Exhaust Dyeing
Appearance: Yellow powder
Main component: Stilbene disulphonate derivative
Ionicity: Anionic
pH (1%): 9.0 - 10.0
Solubility: Dissolving in hot water
Stability: pH 7.0-12, hard water below 300ppm, stable to electrolyte and Peroxide
Dosage: 0.05-0.2% o.w.f.
- Natural white shade
- High affinity, suitable for exhaust process with high exhaustion rate
- High concentration
- Suitable for one-bath and one-step peroxide bleaching and whitening
- Stable to hydrogen peroxide, alkali and electrolyte
- Suitable for cellulosic fibers, Nylon, wool and silk
Product Detail
Whitex Glow BHT-L / BHT-R
By Exhaust Dyeing & Padding Process
Appearance: Brown yellow powder
Main component: Stilbene disulphonate derivative
Ionicity: Anionic
pH (1%): 7.0 - 10.0
Solubility: Miscible in water
Stability: pH 7.0-12, hard water below 300ppm, stable to electrolyte and peroxide
Dosage: 0.2-1.0% o.w.f. (exhaust), 2-10 g/L (padding)
- Natural white shade
- Good affinity, suitable for both exhaust and continuous process with a high exhaustion rate
- Excellent build-up with brilliant whiteness
- Miscible at any proportions with water, especially suited for automatic dosing systems
- Stable to hydrogen peroxide, alkali and electrolyte
- Suitable for cellulosic fibers, Nylon, wool and silk
Product Detail
Whitex Glow 4BK / 4BK-LC
By Exhaust Dyeing
Appearance: Yellow powder
Main component: Stilbene disulphonate derivative
Ionicity: Anionic
pH (1%): 9.0 - 10.0
Solubility: Dissolving in hot water
Stability: pH 7.0-12, stable to electrolyte
Dosage: 0.2-0.8% o.w.f.
- Bluish white shade
- High affinity, suitable for exhaust process
- Excellent build-up with brilliant whiteness
- Stable to hydrogen peroxide, alkali and electrolyte
- Suitable for one-bath and one-step peroxide bleaching and whitening
- Suitable for cellulosic fibers, Nylon, wool and silk
Product Detail
Whitex Glow BBT / BBP
By Exhaust Dyeing
Appearance: Bluish liquid
Main component: Stilbene disulphonate derivative
Ionicity: Anionic
pH (1%): 7.0 - 10.0
Solubility: Miscible in water
Stability: pH 7.0-12, hard water below 300ppm, stable to electrolyte and Peroxide
Dosage: 0.3-1.0% o.w.f.
- Bluish shade
- High affinity, suitable for exhaust process
- Excellent build-up with brilliant whiteness
- Suitable for one-bath and one-step peroxide bleaching and whitening
- Suitable for cellulosic fibers, Nylon, wool and silk
- APEO free, environment friendly
Product Detail
Whitex Glow BMF-L
By Exhaust Dyeing & Padding Process
Appearance: Yellow to brown liquid
Main component: DSD derivative
Ionicity: Anionic
pH (1%): 7.0 - 10.0
Solubility: Miscible in water
Stability: pH 3.0-12.0, hard water below 150ppm, stable to Peroxide
Dosage: 0.3-0.8% o.w.f. (exhaust), 3-8 g/L (padding)
- Natural white shade
- Medium to low affinity, excellent leveling properties
- Good build-up with bright whiteness
- Suitable for one-bath and one-step peroxide bleaching and whitening
- APEO free, environment friendly
Product Detail
Whitex Glow MST-L
By Padding Process
Appearance: Yellow to brown liquid
Main component: Stilbene disulphonate derivative
Ionicity: Anionic
pH (1%): 6.0 - 10.0
Solubility: Miscible in water
Stability: pH 7.0-12, hard water below 300ppm, stable to Peroxide
Dosage: 1.0-10.0 g/L
- Natural white shade
- Medium to low affinity, excellent leveling properties
- Good build-up with bright whiteness
- Suitable for cellulosic fibers
- APEO free, environment friendly
Product Detail
Whitex Glow PE / PE-150% / PE-2B / SFN
By Exhaust Dyeing or Padding
Appearance: Yellowish / (Bluish grey) dispersion liquid
Main component: Bisstyrene benzene derivatives
Ionicity: Nonionic
Stability: pH 2.0-12, hard water stable, stable to Peroxide, unstable to reducing agents
Dosage: 0.05-0.5% o.w.f. (exhaust), 0.5-5g/L (padding)
- Natural / Bluish white with excellent sublimation fastness and build-up
- High affinity to polyester in boiling bath even without carrier
- Stable in H2O2 bleaching
- Suitable for T/C one-bath whitening and resin finish
- APEO free, environment friendly
- Oeko-Tex Standard 100 approved
Product Detail
Whitex Glow NFW 450% / NDW-L
By Exhaust Dyeing or Padding
Appearance: Yellow powder
Main component: Bis-styrene benzene derivatives
Ionicity: Anionic
Solubility: Dissolves in hot water
Stability: pH 1.0-12, hard water unstable, stable to Peroxide, unstable to reducing agents
Dosage: 0.05-0.2% o.w.f. (exhaust), 0.5-2g/L (padding)
- Excellent whiteness and good fastness
- High affinity for polyamide, wool, and silk
- Low to medium affinity to cellulosic fibers
- Excellent leveling effect in padding
- No effect on light fastness with resin treatment
- APEO free, environment friendly
Product Detail
Whitex Glow CL-E
By Exhaust Dyeing or Padding
Appearance: Yellow liquid
Main component: Hydrazine sulfonate derivatives
Ionicity: Anionic
Stability: Stable in both acid and alkali conditions, stable with resin finishing agents, metal salt catalysts, hard water below 300ppm, electrolytes, peroxide, sodium hypochlorite, sodium chlorite, reducing agents (Rongalite)
Dosage: 0.5-2.5% o.w.f. (exhaust), 5-20g/L (padding)
- Highest light fastness and chlorine fastness among all Nylon OBAs
- High affinity to polyamide
- Medium affinity to cellulosic fibers
- Suitable for continuous process
- APEO free, environment friendly
Product Detail
Whitex Glow BAC
By Exhaust Dyeing or Padding
Appearance: Yellowish transparent liquid
Main component: Benzimidazole derivatives
Ionicity: Cationic
pH (1%): About 5.0
Stability: Stable in acid, unstable in alkali conditions, hard water below 300ppm, stable to electrolytes and metal salt catalysts, stable to Peroxide and reductive bleaching
Dosage: 0.25-1.5% o.w.f. (exhaust), 5-15g/L (padding)
- Brilliant bluish violet white with excellent fastness
- High affinity to acrylic fibers
- Good build-up and levelness
- Can be used in sodium chlorite bleaching processes
- Excellent chemical stability
- APEO free, environment friendly
0 Comments