Revolutionizing Textile Preparation with High-Performance Printing Chemicals for Superior Quality and Efficiency
Product details
Whitex CP-20 series
Reactive printing Thickener (for Cotton, Rayon)
Appearance: Light brownish and white powder
Viscosity @ 25°C: 5% 30,000-40,000cps
pH: 10.0 - 11.0
Dosage: 3% - 4%
- Higher color value and brighter color shade than conventional sodium alginate
- Suitable for reactive printing on cotton or viscose
- Treated with preservative
- APEO free, GOTS, Oeko-Tex Standard 100 approved
Product details
Whitex CP-20 series
Reactive printing Thickener (for Cotton, Rayon)
Appearance: Light brownish and white powder
Viscosity @ 25°C: 5% 30,000-40,000cps
pH: 10.0 - 11.0
Dosage: 3% - 4%
- Higher color value and brighter color shade than conventional sodium alginate
- Suitable for reactive printing on cotton or viscose
- Treated with preservative
- APEO free, GOTS, Oeko-Tex Standard 100 approved
Product details
Whitex CR-S
Reactive printing Thickener (for Cotton, Rayon)
Appearance: White powder
Viscosity @ 25°C: 5% 30,000-40,000cps
pH: 7.0 - 9.0
Dosage: 3% - 4%
- Higher color value and brighter color shade
- Good sharpness of the prints
- Suitable for cotton and rayon reactive printing
- APEO free
Product details
Whitex CQ / CRP
Textile Printing Thickener
Appearance: White powder
Viscosity @ 25°C: 3% 25,000-35,000cps
Ionicity: Anionic
pH: 7.0 - 8.0
Dosage: 1.8 - 2.1%
- High color value and bright color shade, good sharpness of the prints
- Good screen penetration, suitable for high-speed rotary machine
- Good paste stability and electrolyte compatibility and good wash-off property
- No APEO, meet OEKO-TEX standard 100
Product details
Whitex HV / H4 / H8
Sodium Alginate
Appearance: Light brownish powder
Viscosity @ 25°C: 5HV 1% 500-600cps, H4 1% 200-250cps, H8 1% 80-150cps
pH: 7±0.5
Dosage: 1.8 - 3.0%
- High purity, various viscosity sodium alginate
- Widely used in reactive and disperse printing
- Less paste dosage
- Treated with preservative
- APEO free
Product details
Whitex CR-V / CR / CR-8
Synthetic Sodium Alginate
Appearance: Off white to brownish powder
Viscosity @ 25°C: CR-V, CR 3% 20,000-23,000cps, CR-8 5% 20,000-25,000cps
pH: 7±0.5
Dosage: 1.8 - 3.5%
- New chemical modification with similar structure as natural sodium alginate
- Suitable for cotton and rayon reactive printing
- Good color value and acceptable wash-off properties
- Good substitute to conventional sodium alginate
- APEO free
Product details
Whitex RS-A / RS-T / RS-F / RS-TN
Synthetic Thickener for Reactive Printing
Appearance: Off white viscous liquid
Main component: Polyacrylate salt
Viscosity @ 25°C: 2% 30,000±3,000cps
pH: 7±0.5
Dosage: 4% - 5%
- Quick paste forming
- Stable viscosity in printing paste
- High purity, no screen-clogging problems
- High color yield and good wash-off of prints
- APEO free
Product details
Whitex RS-AT / RS-2C
Mixture Thickener for Reactive Printing
Appearance: Brownish viscous paste
Main component: Polyacrylate salt, sodium alginate
Viscosity @ 25°C: 4% 25,000±3,000cps
pH: 7±0.5
Dosage: 4% - 5%
- Easy paste dissolving
- Significantly improve reactive printing color value
- High purity, no screen-clogging problems
- Soft handle, suitable for terry towel
- APEO free
Product details
Whitex DP-V01
Synthetic Thickener for Polyester Printing
Appearance: White to beige viscous liquid
Main component: Polyacrylate salt
Viscosity @ 25°C: 5% 20,000~25,000cps
pH: 6.0 - 8.0
Dosage: 3% - 5%
- Quick paste forming
- Stable viscosity in printing paste
- High color yield and good wash-off prints
- APEO free
Product details
Whitex NS-9 / TP-1
Disperse Printing Thickener (for Polyester)
Appearance: Beige colored powder
Viscosity @ 25°C: 8% 35,000±3,000cps
pH: 8±0.5
Dosage: 5% - 6%
- Higher color value and brighter color shade than conventional tamarind-based thickener
- Good filtration, no screen-clogging problems
- Treated with preservative
- APEO free
Product details
Whitex MGB400
Cationic Printing Thickener (for Carpet, Blanket)
Appearance: Light yellow powder
Viscosity @ 25°C: 2% 25,000-30,000cps (after adding citric acid)
pH: 8.5 - 10.0
Dosage: 1% - 1.5%
- Quick paste forming after adding acid
- Small dosage, suitable for Acrylic or Polyester carpet/blanket printing with high paste consumption
- Good filtration, no screen-clogging problems
- APEO free
Product details
Whitex C-5
Modified Starch Thickener
Appearance: White colored small flake
Viscosity @ 25°C: 8% 30,000-35,000cps
pH: 11.0 - 12.0
Dosage: 5% - 6%
- Widely used in Vat, disperse, alkali burn-out printing
- Gives higher color value and brighter color shade
- APEO free, GOTS, Oeko-Tex Standard 100 approved
Product details
Whitex Print BD-A / BDL-N / BD-NF
Concentrated Acrylic Co-polymer Binder
Appearance: Fluorescent white emulsion liquid
Ionicity: Anionic
pH (2%): 6.0 - 7.0
Dosage: 10-20% (Pigment printing), 12-15% (Coloured Indigo Discharge Prints)
- High printing efficiency, very easy to use
- No screen clogging problem
- Excellent color value, good rubbing fastness (both wet and dry)
- APEO free and complies with OEKO-TEX standard 100
Product details
Whitex Print PT-16
Textile Printing Thickener
Appearance: Milky white viscous liquid
Viscosity @ 25°C: 3% 32,000-40,000cps
pH: 6.0 - 7.0
Dosage: 1.2 - 1.5%
- Extremely high efficiency, very easy to use, very quick viscosity forming
- No screen clogging problem
- High color yield and bright color shade
- No APEO, complies with OEKO-TEX standard 100
Product details
Whitex Print PD-40
Emulsifier for Pigment Printing
Appearance: Clear viscous liquid
Viscosity @ 25°C: 10,000-15,000 cps
pH: 7.0 ± 0.5
Dosage: 3.1 - 3.3%
- Excellent emulsification properties and emulsion stability
- Good resistance to both strong reduction and oxidizing agents
- Less dosage than conventional emulsifier Peregal O in oil-water emulsion system
- No APEO, complies with OEKO-TEX standard 100
Product details
Whitex Print KA-200
White Paste for Cover Printing
Appearance: Milky white sticky liquid
Ionicity: Nonionic
pH: 7.0 - 9.0
Dosage: 30-100%
- Good covering printing effect and good whiteness
- Good fastness and operational performance
Product details
Whitex Print DP-H / DP-L
Indigo Discharge Accelerator
Appearance: Yellow colored powder
Printing dosage: 3%-6% o.w.p.
- Accelerates the oxidation reaction
Product details
Whitex JD-90
Printing Thickener
Appearance: Beige colored powder
Printing dosage: 4%-5% o.w.p.
- Resistant to strong acid and oxidant
Product details
Whitex Print BD-LN
Binder for Pigment
Appearance: Fluorescent white emulsion liquid
Main component: Acrylate polymer
pH: 7±0.5
Dosage: 10% - 30% o.w.p.
- Self-crosslinking, High color yield
- Good dry, wet and soaping fastness
- APEO free, comply with Oeko-Tex 100
Product details
Whitex Print EML
Special Printing Aid Chemical
Appearance: Milky white viscous liquid (paste)
Main component: Special emulsifying agent
pH: 6.0-8.0
Dosage: 20% o.w.p.
- Improves color value and color brilliancy
- Improves printing screen penetration
- Improves handle of printed fabrics
Product details
Whitex DPRA
Fabric Padding Paste for Inkjet Printing
Appearance: Colorless transparent viscous liquid
Main component: High polymers
pH: 7±0.5
Padding dosage: 20 - 40g/L
- Improves inkjet printing color value significantly
- Liquid form, easy to use, easy wash-off
- APEO free
Product details
Whitex DP-400C
Digital Printing Thickener for Reactive Ink
Appearance: White powder
Main component: High polymers
pH: 7±0.5
Padding dosage: 3% - 4%
- Improves inkjet printing color value significantly
- Quick paste forming, easy to use, easy wash-off
- APEO free
Product details
Whitex PT-S / PT-S Conc
Liquid Reduction Agent for Printing
Appearance: Colorless or yellowish transparent liquid
Main component: Aqueous solution of inorganic salts
Ionicity: Anionic
pH (1%): 6.0 - 9.0
Dosage: 0.5%-1% o.w.p (printing), 0.5-2.0 g/L (dyeing)
- Good substitute to Resist Salt
- Prevents undesirable color shade change of both disperse and reactive dyes caused by reduction
- Easy dosing, no solubility problem, low foam
- APEO free
0 Comments