Revolutionizing Textile Preparation with High-Performance Pretreatment Chemicals for Superior Quality and Efficiency
Product details
Whitex Scour NPS
For Cotton
Appearance: Pale grey or pale yellow viscous liquid
Main Component: Natural clay mixture with surfactant
Ionicity: Nonionic
pH (1%): 4.0 - 6.0
Dosage: 1.0 - 3.0g/L
- Low foaming, excellent whiteness
- Excellent wetting properties, imparts soft fiber handle
- APEO free, environment friendly
Product Details
Whitex Super Blue HC / Super Blue HC Conc
For Cotton
Appearance: Blue color transparent liquid
Main Component: Surfactant
Ionicity: Anionic
pH (1%): 4.0 - 7.0
Dosage:
- 1.0-1.5% o.w.f. for Blue HC
- 0.5-0.75% o.w.f. for Blue HC Conc
- Low alkali levels after bleaching, neutralization is not required
- Shortens bleaching process
- Saves time, energy, steam, water
- Gives good whiteness and absorbency
Product details
Whitex Scour LAD
Scouring Agent
Appearance: Greenish brown colored liquid
Main Component: Surfactant
Ionicity: Nonionic/anionic
pH (1%): 2.5 - 3.5
Stability: Stable to pH 3, 30g/L NaOH and oxidant
Dosage: 0.3-1% o.w.f.
- Rapid wetting and low foaming with low alkali
- Excellent emulsification and detergency properties
- Compatible with peroxide bleaching
- Suitable for overflow jet dyeing machines and all exhaust dyeing machines
- APEO free, complies with Oeko-Tex Standard 100
Product Details
Whitex Scour LAD EN + PTM
For Cotton
Appearance: Yellowish brown liquid
Main Component: Surfactant
Ionicity: Anionic/Nonionic
pH (1%): Neutral
Dosage: 1.0-2.0 g/L
- Very quick wetting property which improves the levelness of pretreatment and dyeing process
- Good emulsifying and washability, helping to remove wax from cotton fiber
- Minimal effect on reactive/direct dyestuff
- Scouring and dyeing can be finished in one bath, saving water and shortening the process
- APEO free, environmentally friendly
Product Details
Whitex Scour LTP-G / LTP-H
For Cotton
Appearance: Blue to violet transparent liquid
Main Component: Surfactant
Ionicity: Anionic/Nonionic
pH (1%): 6.0 - 8.0
Stability: Stable to acid (pH 3) and alkali (30g/L NaOH)
Dosage: 1.0 - 1.5 g/L
- Low temperature bleaching
- Greatly reduces weight loss
- Savings in energy and steam
- Gives good whiteness and absorbency
- Especially suitable for cotton knit, towel, and yarn
- Oeko-Tex Standard 100 approved
Product Details
Whitex Scour TC
Multifunctional Scouring Agent
Appearance: White powder
Component: Special chemicals
Ionicity: Anionic/Nonionic
pH (1%): 12.5 ± 1.0
Stability: Stable at alkali and oxidant agent
Dosage: 2-4 g/L
- Excellent emulsification, detergency, and dispersibility properties to remove the wax and other impurities in cotton
- Imparts fabrics with excellent whiteness and capillary effect
- Without caustic soda during this process to protect the fabric strength
- Biodegradable and environmentally acceptable
Product Details
Whitex Scour LFD Conc
Scouring Agent
Appearance: Colorless to pale yellow liquid
Main Component: Surfactant
Ionicity: Nonionic
pH (1%): Neutral
Stability: Stable to pH 3 or 30g/L NaOH
Dosage: 0.2 - 1.0g/L
- Rapid wetting and low foaming
- Excellent emulsification and detergency properties
- Compatible with enzymes (amylase, catalase)
- APEO free, environmentally friendly
- Oeko-Tex Standard 100 approved
Product Details
Whitex Scour LFD-M
Scouring Agent
Appearance: Greenish brown colored liquid
Main Component: Surfactant
Ionicity: Nonionic/Anionic
pH (1%): 2.5 - 3.5
Stability: Stable to pH 3, 30g/L NaOH and oxidant
Dosage: 0.3-1% o.w.f.
- Rapid wetting and low foaming
- Excellent emulsification and detergency properties
- Compatible with enzymes (amylase, catalase)
- Suitable for overflow jet dyeing machines and all exhaust dyeing machines
- APEO free, complies with Oeko-Tex Standard 100
Product Details
Whitex Scour LAD
Scouring Agent
Appearance: Greenish brown colored liquid
Main Component: Surfactant
Ionicity: Nonionic/Anionic
pH (1%): 2.5 - 3.5
Stability: Stable to pH 3, 30g/L NaOH and oxidant
Dosage: 0.3-1% o.w.f.
- Rapid wetting and low foaming with low alkali
- Excellent emulsification and detergency properties
- Compatible with peroxide bleaching
- Suitable for overflow jet dyeing machines and all exhaust dyeing machines
- APEO free, complies with Oeko-Tex Standard 100
Product Details
Whitex Scour ARSK
Chelating Agent
Appearance: Low viscosity transparent liquid
Main Component: Organic acid-based complex
Ionicity: Anionic
pH (1%): 5-6
Stability: Stable to pH 3-12
Dosage: 1-3 g/L
- Highly effective in removing metallic impurities
- Excellent compatibility with high alkaline levels
- Enhances scouring efficiency and optimizes dye uptake
- Biodegradable, environmentally friendly
Product Details
Whitex Scour CBS / MSS
Scouring Agent
Appearance: Yellowish liquid
Main Component: Surfactant mixture
Ionicity: Nonionic
pH (1%): 8.5 - 9.5
Stability: Stable at high pH and temperature
Dosage: 2-4 g/L
- Provides excellent emulsification and wetting action
- Effective removal of impurities and waxes from cotton
- Low foaming and ideal for high temperature scouring
- Complies with Oeko-Tex Standard 100
Product Details
Whitex Scour CPD-02
Scouring Agent
Appearance: Colorless to pale yellow liquid
Main Component: Surfactant
Ionicity: Nonionic
pH (1%): Neutral
Stability: Stable to pH 3, 30g/L NaOH and oxidants
Dosage: 0.2-1.0 g/L
- Offers excellent emulsification, wetting, and detergency
- Biodegradable and environmentally friendly
- Suitable for both hot and cold scouring
- Does not damage fabric strength and retains softness
Product details
Whitex Scour RGN / LFD-N
Scouring Agent
Appearance: Colorless to turbid liquid
Main Component: Surfactant
Ionicity: Nonionic
pH: Neutral
Stability: Stable to pH 3, 30g/L NaOH, oxidant
Dosage: 0.5-1.5g/L (desizing), 0.2-1.0g/L (scouring), 2.0-4.0g/L (bleaching), 4.0-6.0g/L (CPB)
- Rapid wetting, low foaming
- Excellent emulsification and detergency properties
- Stable to peroxide
- High concentration of active ingredients
- APEO free, environment friendly
Product details
Whitex Scour PST-109N Conc
Scouring Agent
Appearance: Yellow viscous liquid
Main Component: Surfactant
Ionicity: Anionic / Nonionic
pH (1%): 5.0 - 8.0
Stability: Stable to pH 3, 120g/L NaOH, oxidants
Dosage: 0.3-1.0g/L (desizing), 0.5-2.0g/L (scouring), 3.0-8.0g/L (padding)
- Rapid wetting, low foaming
- Excellent emulsification and detergency properties
- Stable to higher alkali conditions
- APEO free, environment friendly
Product details
Whitex Scour H / AUD
Chelating Agent
Appearance: Yellow viscous liquid
Ionicity: Anionic
pH (1%): 8.0 - 9.0
Chelating Power: 1 g Whitex Scour H (at room temp.) Ph 10-11, Fe3+ ≥ 600mg, CaCO3 ≥ 125mg; Fe3+ ≥ 600mg (50g/L NaOH)
Dosage: 1-3g/L (desizing & scouring), 2-6g/L (scouring & bleaching)
- Excellent binding capacity in strong alkali conditions
- Excellent dispersibility to remove calcium deposits
- Stable to electrolyte, high temperature, oxidizing and reducing agents
- Good synergistic effect with surfactant
- APEO free, environment friendly
Product details
Whitex Scour MSS
Hydrogen Peroxide Stabilizer
Appearance: Pale yellow transparent liquid
Ionicity: Anionic
pH: 2.0 - 3.0
Stability: Stable in pH 2-14 and 40g/L NaOH
Dosage: 3.0-5.0g/L
- Non-silicate stabilizer for peroxide bleaching
- Controls peroxide decomposition in bleaching
- Strong chelating properties for metal ions
- Excellent dispersing properties prevent soil re-deposition
- Stable to high alkali concentrations
- APEO free, environment friendly
Product details
Whitex Scour CO-LA
Multifunctional Alkaline Buffer
Appearance: Colorless transparent to pale yellow turbid liquid
Ionicity: Anionic
pH (1%): 12.0-13.5
Dosage: 4-8 g/L (scouring), 6-15 g/L (bleaching)
- Excellent detergency, suspension and dispersion properties, helps to remove the wax and other associated organisms on cotton fibers
- Good alkali buffering performance
- Gives the treated fabric even whiteness and absorbency
- Biodegradable, meets the requirements of Oeko-Tex 100 standard
Product details
Whitex Scour TSC-E / TSC / TSC-E Conc
Oil remover for polyester and cotton
Appearance: Yellow transparent liquid
Main Component: Mixture of surfactants
Ionicity: Nonionic
pH: 6.0 - 8.0
Dosage:
0.2-0.4 g/L (for scour-dye Polyester)
0.3-0.6 g/L (scouring/bleaching cotton)
- Excellent emulsification and detergency properties for removing oil and wax
- Excellent soil dispersing properties
- Suitable for scouring cellulose by exhaust process
- APEO free, environment friendly
Product details
Whitex Scour LPA-G
Scouring Agent
Appearance: White liquid emulsion
Main Component: Surfactant and solvent
Ionicity: Anionic
pH: 9.0 - 11.0
Dosage:
1-2g/L (pretreatment or reduction cleaning)
0.5-3g/L (dyeing)
- Removes oligomers, silicon oil and wax
- Excellent emulsification and dispersing properties
- Prevents re-deposition and back-staining
- Suitable for one-bath scouring and dyeing of polyester
- Easy to wash off, improves fastness
- APEO free, environment friendly
Product details
Whitex Scour LFD-30
Scouring Agent
Appearance: Colorless to pale yellow liquid
Main Component: Surfactant
Ionicity: Nonionic
pH: Neutral
Stability: Stable to pH 3 or 30g/L NaOH
Dosage: 0.2 - 1.0g/L
- Rapid wetting and low foaming
- Excellent emulsification and detergency properties
- Compatible with enzymes (amylase, catalase)
- APEO free, environment friendly
- Oeko-Tex Standard 100 approved
Product details
Whitex Scour BFE
Oil remover for Spandex contained fabrics
Appearance: Colorless transparent liquid
Ionicity: Nonionic
pH (1%): About 7.0
Dosage:
1-2g/L (exhaust)
2-6g/L (continuous)
- Removes silicone, paraffin, prevents re-deposition
- Works at low temperatures, avoids fiber shrinking
- Suitable for both continuous & discontinuous processes
- APEO free, environment friendly
Product details
Whitex Scour AOP Conc
Anti-Yellowing Agent
Appearance: White powder
Ionicity: Nonionic
pH (1%): 6.0 - 7.0
Dosage:
2-4g/L (padding)
0.2-0.6% o.w.f. (exhaust)
- Prevents Nylon or Nylon spandex fabrics from yellowing during heat setting or mould pressing
- Increases dyeing exhaustion rate
- Improves scouring effect
- APEO free, environment friendly
Product details
Whitex Scour BHT
Anti-Phenolic-Yellowing Agent
Appearance: Yellow to brown liquid
Main Component: Sulfonated organic substance
Ionicity: Anionic
pH: Neutral
Stability: Hard water and acid stable. Stable up to 2°Bè NaOH, compatible with OBA
Dosage:
20-30g/L (padding)
2-3% o.w.f. (exhaust)
- Protects Nylon fabric from yellowing caused by BHT (butyl-hydroxy-toluene) in plastic vinyl
- Suitable to both padding and exhaustion
- APEO free, environment friendly
0 Comments